 |
July
2004
|
 |
 |
|
|
|
|
 |
|
|
|
|
 |
|
|
The
new PCI-1760U launched today is a fresh initiative
from Advantech to offer an array of features on
a digital input relay card. Universal PCI is used
to cater for both 5 and 3.3 V systems, and the 8
optically isolated digital inputs with isolation
protection up to 2,500 VDC makes it unproblematic
to collect digital signals in noisy environments.
Also available is 8 relay actuators that can be
used as an on/off control devices or small power
switches, and 2 isolated PWM outputs for custom
applications. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Advantech has replaced its FPM-3175 with another
flat panel monitor specially designed for industrial
applications: FPM-3170, a 17-inch SXGA TFT LCD.
The chassis of the FPM-3170 is made of stainless
steel, and offers an optional capacitive touch screen.
In addition, the FPM-3170 also provides many industrial-grade
features such as a NEMA4/IP65 compliant Al-Mg front
panel and multi-signal input to support BGA, DVI-D,
Video and S-Video. |
|
|
|
| |
|
|
|
|
|
|
|
The
new PCI-1611U PCI-1612U and PCI-1620U have
been upgraded to meet market demands for higher
reliability and stability. The upgraded cards
support universal PCI connectors for both
3.3 V and 5 V signals, and surge protection
for trigger conditions, which ensures that
power lines are completely secure. |
|
|
|
|
|
|
| |
|
|
|
|
|
With
a shortage of the PDS-1024 motion chip, the PCL-839
is being replaced by PCL-839+. The PCL-839+ is practically
identical to its predecessor. It's a low-cost 3-axis
stepping motor control card that provides the most
basic motion control functions like linear and 2D
circular interpolation. Some improvements is offered
though. The PCL-839+ supports a higher pulse out
rate and a bigger position counter than PCL-839. |
|
|
|
|
|
 |
| |
|
|
|
|
|
Advantech
presented today the 12-channel ADAM-4056S sink type
and the ADAM-4056SO source type isolated digital
output modules. These two modules provide higher
maximum load than any of the other ADAM-4000 I/O
modules, and feature a communication watchdog, fail
safety functions, as well as support for the Modbus
RTU protocol. The maximum 200 mA load of the ADAM-4056S
digital output is applicable to versatile devices
with sink type digital inputs. The 1 A per channel
of the ADAM-4056SO digital output signal is used
in applications such as solenoid valve control in
chemical plants. |
|
|
|
|
|
|
|
|
|
|
|
|
|
With
an Advantech PCI-1610A integrated with IPC-644 and
PCI-6871, a commercial bank in China was able to
improve the availability of their account balance
inquiry service in a more cost-effective way than
adding more ATMs. |
|
|
|
|
|
|
|
|
A
manufacturer of hydraulic machines in China
needed an automated quality assurance system
to eliminate common errors in their manual
testing process. With Advantech's IPC-610P
and ADAM-5510 PC-based Controllers, a distributed
performance verification system was designed.
The system can measure oil pressure tolerance
and test the communication interface as well
as the inverter and motor operation status.
The result was increased efficiency and accuracy,
leading to higher quality and increased manufacturing
capacity.
|
|
|
|
|
|
|
|
| |
|
|
SUBSCRIPTION
MANAGEMENT
If you would like to change your email address or be removed
from future Advantech mailings, send an email to:IA@advantech.com.tw.
Please be sure to include your name and the email address to
which this message was sent and indicate if you want to change
your address or be removed.
Advantech is committed to protecting your privacy. We do not
sell, rent, or give away any of your personal information. For
more information, view our Privacy
Policy. |
|
|
|
|
|
